Voice Coil EP, E/P, I/P Pressure
Transducers (TXPD6000) View
TXPD6000 Specs
The TXPD6000 E/P,
I/P pressure transducer is a field reversible unit that provides
an output directly or inversely proportional to the input
signal. Its six available output pressure ranges and six
available input signal ranges meet most process and machine
requirements. The TXPD6000 Series is designed for precision
applications providing maximum versatility. In this explosion
proof NEMA 4X configuration, the TXPD6000 pressure transducer is
approved by FM, CSA and ATEX and ready for your installation in
hazardous duty
High
Precision I/P Pressure Transducers (TXI7800)
View
TXI7800 Specs
Designed for use in
hazardous environments, the Fairchild TXI7800 series product is
an explosion proof I/P pressure transducer. It operates under
the same principles as the T7800 I/P pressure transducer;
however the TXI series includes NEMA 4X explosion proof
construction. Our design isolates the electronics chamber from
the pneumatic section, thereby creating a safer and longer
service life product, especially for applications handling
natural gas. In the Extended Range units, the TXI7800 series
will also deliver up to 0-120 psi [0-8.0 BAR], (0-800 kPa)
output. The TXI7800 series is approved for hazardous use and
carries FM. CSA, ATEX and IECEx approvals.
Moisture
Resistant I/P Pressure Transducers (TXI7850)
View
TXI7850 Specs
Fairchild's
TXI7850 I/P Pressure Transducer operates under the same basic
principles as the TXI7800 pressure transducer, yet improves upon
the design. By encapsulating and otherwise protecting the
critical components, Fairchild designed the Explosion proof
TXI7850 I/P pressure transducer to be highly resistant to
moisture within the supply air lines. Available in both standard
and extended range configurations, the TXI7850 I/P transducer
delivers vibration, shock and moisture resistance in output
pressures up to 0-120 psi [0-8.0 BAR], (0-800 kPa). It carries
full Agency Approvals, including FM, CSA and ATEX
certifications.
Explosion
Proof P/I Pressure Transducers (TXI8000)
View
TXI8000 Specs
Our TXI8000 P/I
Pressure Transducer Series is a miniature two wire pressure
device that converts a pneumatic input signal to a linearly
proportional output current. It is field reversible and offers
output choices of 4-20 mA or 10-50 mA. Designed for precision
applications, the TXI8000 Series of pressure transmitters
provides maximum versatility. The TX8000 Unit consists of a
TT8000 Series Transducer enclosed in an explosion-proof/NEMA 4X
(IP65) housing and carries hazardous location approvals from FM
and CSA.
|
