Lock in Place I/P Pressure
Transducers (T6100)
View
T6100 Specs
Uniquely
designed by Fairchild, the T6100 "Lock in Last Place"
I/P pressure transducer provides flexibility,
reliability and safety in applications requiring
protection from signal failures to critical control
system instruments. Its simple yet effective voice coil
actuation now Locks in "Last Position" to accurately
capture the setpoint with extremely low drift after a
power loss permits the T6100 to maintain set point. The
unit's IP65 rating allows you to handle moist
applications with ease.
High Flow Microprocessor E/P, I/P Pressure Transducers
(T7900)
View
T7900 Specs
The
Fairchild T7900 Series Electro-Pneumatic E/P, I/P
Pressure Transducers have a closed-loop, integrated,
microprocessor control system that regulates outlet
pressure. You can control the output from the Model
T7900 pressure transducer using the keypad or from an
analog control signal. You can control the output from
the Model T7900D using the keypad and through DeviceNet™
Communication network. With its integral booster
section, the T7900 delivers high accuracy at its high
flow capacity of 100 SCFM (170 m3/HR)
High Flow, High Pressure E/P, I/P Pressure Transducers
(T1750)
View
T1750 Specs
Fairchild's new T1750 I/P, E/P pressure transducer
delivers high performance in terms of it's high
accuracy, high pressure, high flow and fast response.
It operates with the same pinpoint accuracy from 15 psi
[1BAR], (150 kPa) output all the way up to 750 psi [50
BAR] (5 MPa) output. This unit moves tremendous air
volume, as its 1000 SCFM (1700 m3/HR) flow capacity is
second to none. When you need fast response you can rely
on the T1750 response time of less than 15 ms. The Model
T1750 Transducers have a closed-loop, integrated,
microprocessor control system that regulates outlet
pressure. You can control the output from the Model
T1750 using the keypad or from an analog control signal.
The Feed and Bleed Solenoid Valves control pressure in
the Signal Chamber of the Booster Section. A pressure
sensor measures the outlet pressure and provides a
feedback signal to the Electronics Section. Any
variation in pressure between the setpoint and the
outlet pressure activates the Feed and Bleed Solenoid
Valves to change the output pressure.
Compact E/P, I/P Pressure Transducers
(T7800)
View
T7800 Specs
High
performance at economical price is available from the
Fairchild T7800 series of piezo-ceramic actuated I/P
pressure transducers. These units offer state of the art
accuracy up to 0.15% FS. The disc actuation mechanism
provides a product that is totally impervious to shock,
vibration and positional orientation. In the Extended
Range units, an additional Relay Section amplifies the
output pressure to obtain up to 0-120 psi [0-8.0 BAR],
(0-800 kPa) output. The T7800 series is approved for
Intrinsic Safety and Non-Incendive use carries FM. CSA,
ATEX and IECEx approvals.
|
