|
Fast
Response E/P, I/P Pressure Transducers (T5200)
View T5200 Specs
The T5200 Transducer
is a Fast Response I/P, E/P Pressure Transducer controlled by a
4-20 mA current in a control loop. With its reliable signal
conversion and pneumatic circuit sections, the T5200 I/P
Pressure Transducer provides fast response to input signal
changes, resulting in faster loop control and savings in process
materials. Its minimal air consumption allows you to use the
T5200 in systems where operating gas is expensive. Five
available input signal ranges deliver the versatility to meet
most process and machine requirements.
Fast
Response High Flow E/P, I/P Pressure Transducer (T5220)
View T5220 Specs
As a Fast Response
High Flow I/P, E/P Pressure Transducer, the T5220 has all the
performance you want in a voice coil I/P transducer product, but
it also includes a built in booster section to deliver high flow
capacity, up to 45 SCFM (76.5 m3/HR) with six available rations
to allow pressure multiplication to the output. This feature,
along with the adjustable positive and negative bias allows you
to custom design your control system for exactly the desired
performance
Adjustable
Ratio, E/P, I/P Pressure Transducer (T5221)
View T5221 Specs
When your application
requires a very specific control system, look to the T5221
Adjustable Ratio I/P, E/P Pressure Transducer. The Fairchild
T5221 I/P pressure transducer has all the response and flow
performance features of the T5200 series, with the addition of
an Adjustable Gain which allows this single device to cover most
industrial and process control requirements.
Digital
Pressure Transducer (T5400)
View T5400 Specs
Our T5400 Transducer
is a Digital-Pneumatic device that provides a pneumatic output
signal controlled by 8 bit digital data instructions from a
central control room, a remote control location, or a local
control station. Its Fail Safe High or Low will return the
output to 3 psig for Direct Acting Mode or to 15 psig for
Reverse Acting Mode if the power is lost, regardless of the
logic selected.
Digital
High Flow E/P, I/P Pressure Transducer (T5420)
View T5420 Specs
The T5420 is a
Digital-Pneumatic Transducer, compatible with most digital
systems using TTL and CMOS Logic. Its Fail safe High or Low will
return the field reversible output to 3 psig for Direct Acting
Mode or to 15 psig for Reverse Acting Mode if the power is lost,
regardless of the logic selected. The Integral Volume Booster
Output of the T5420 meets input requirements of final control
elements requiring a higher capability output signal, increased
output pressure, and/or increased flows.
High Flow
E/P, I/P Pressure Transducers (T5700)
View T5700 Specs
Fairchild's Model
T5700 is a High Flow I/P, E/P Pressure Transducer that converts
a current signal to a linear pneumatic output, using a force
balance system with a flapper and the nozzle to control the
pressure in the intermediate housing. Its low droop under flow
conditions allows improved control of downstream pressure.
Additionally, the T5700 has high flow and is virtually immune to
supply pressure change, which permits use of normal plant air.
The T5700's minimal air use in dead end service (.05 SCFM)
dramatically reduces air consumption.
Compact
E/P, I/P Pressure Transducers (T6000)
View T6000 Specs
The T6000 Compact
Size I/P, E/P Pressure Transducers are field reversible units
that provide an output directly or inversely proportional to the
input signal. Its six available output pressure ranges and six
available input signal ranges meet most process and machine
requirements. The T6000 Series is designed for precision E/P,
I/P pressure transducer applications providing maximum
versatility. The modular construction permits any basic unit to
be used in the explosion-proof, rack, wall, pipe, panel, DIN
rail or 3, 5, 10, or 15 unit manifold configurations and
servicing or calibration is quick and easy.
Lock in
Place I/P Pressure Transducers (T6100)
View T6100 Specs
Uniquely designed by
Fairchild, the T6100 "Lock in Last Place" I/P Pressure
Transducer provides flexibility, reliability and safety in
applications requiring protection from signal failures to
critical control system instruments. Its simple yet effective
voice coil actuation now Locks in "Last Position" to accurately
capture the setpoint with extremely low drift after a power loss
permits the T6100 to maintain set point. The unit's IP65 rating
allows you to handle moist applications with ease.
|
