Pneumatic
Stainless Steel Regulator (M66)
View M66 Specs
The Fairchild
Model 66 is a Stainless Steel Pressure Regulator for high
performance applications with corrosive environments and/or high
temperatures. The Model 66 Stainless steel housing and
internals, along with its fluorocarbon elastomers are compatible
with a wide range of corrosive materials and difficult operating
environments. The Fairchild Model 66 pressure regulator will
handle a 500 psi, 35 BAR maximum supply pressure and offers five
(5) set point pressure ranges from 0-10 psi, 0-0.7 BAR, 0-70 kPa
up to 2-150 psi, 0.15-10 BAR, 15-1000 kPa.
Motorized
Pressure Regulator (MP2400)
View MP2400 Specs
The 24CC, 24CS,
24XC and 24XS M/P Converters are Motor Driven Pneumatic
Regulators with motor assemblies enclosed in a commercial
enclosure, typically used as automation regulators. The
explosion proof motor and housing is coupled to a pneumatic
regulator assembly to provide the desired operating pressure
range for any application. The Fairchild MP2400 motorized
regulator line will handle a 500 psi, 35 BAR maximum supply
pressure and offers eleven (11) different set point pressure
ranges from Vacuum-10 psi, vacuum-0.7 BAR, vacuum-70 kPa up to
2-100 psi, 0.15-7 BAR, 15-700 kPa.
Low
Pressure Motorized Pressure Regulator (MP2400)
View MP2400 Specs
The Model 2400 M/P
Low Pressure Converter is also a Motorized Regulator, however,
this unit uses a larger diaphragm regulator as its pressure
control device to facilitate high accuracy set point control at
very low output pressures. The large diaphragm regulator
attaches to the motor housing and provides precision control in
three (3) available pressure ranges, from 0-20 in water column,
up to 0-5 psi. In these configurations, the MP2400Low Pressure
motorized regulator will handle a supply pressure up to 150 psi,
10BAR, 1000 kPa.
Plunger
Operated Pressure Regulator (M2800)
View M2800 Specs
The Fairchild
Model 2800 Plunger Operated Regulator is designed for
applications requiring more rapid set point adjustment over the
pressure range of the unit than conventional control knob
models. The Model 2800 pneumatic plunger regulator is
recommended for use in a variety of applications where
mechanical actuation is required, including control stations and
test panels, and in construction machinery and industrial or oil
rig control equipment. The Model 2800 pressure regulator will
handle a 250 psi, 17 BAR maximum supply pressure and offers four
(4) set point pressure ranges from 0.5-10 psi, 0.03-0.7 BAR,
3-70 kPa up to 2-150 psi, 0.15-10 BAR, 15-1000 kPa.
Lever
Operated Pressure Regulator (M3400)
View M3400 Specs
The Fairchild
Model 3400 Lever Operated Pressure Regulator is designed as the
combination of a Model 1000 High Flow Pressure Regulator and a
hand held operated lever mechanism with 120 degree maximum
travel. The Model 3400, offered in four (4) different pressure
ranges, is recommended for use in systems requiring the
execution of hand operated pressure control such as the control
of a throttle in an engine or engine room. The regulator is the
logical choice for rapid, "hands on" control in a variety of
applications, including construction machinery, industrial and
oil rig equipment, and cylinder operation.
Low
Pressure Regulator (M4100A)
View M4100A Specs
The Fairchild
Model 4100A is a No Bleed Low Pressure Precision Pressure
Regulator designed for applications that require high
performance and accurate process control at very low pressures.
The Fairchild Model 4100A features control sensitivity of less
than 0.05" water column to maintain your desired set point. The
Fairchild Model 4100A pressure regulator will handle a 150 psi,
10 BAR maximum supply pressure and offers three (3) output
pressure ranges from 0-.07 psi, 0-0.048 BAR, 0-4.8 kPa up to 0-5
psi, 0-0.35 BAR, 0-35 kPa. The Model 4100A has a flow capacity
of up to 30 SCFM, 51m3/hr.
Precision
Stainless Steel Fuel Control Regulator (M67)
View M67 Specs
All New M67
Stainless Steel Fuel Control Regulator offers high accuracy, low
droop, and corrosion resistance for all fuels and mixtures.
Optional quick fuel changeover and internal purge capability.
Pressure ranges from -6 to 45 psi. |
