|
PNEUMATIC VOLUME BOOSTERS
Model 2000
- View
M2000 Specs
40 SCFM
[68 m3/Hr] Forward/Exhaust Flow No Bleed Volume Booster (M2000)
The Model 2000
Pneumatic Volume Booster converts a low flow signal to a high
flow output. It is ideally suited for a variety of applications
including the operation of air systems that require rapid valve
or cylinder action. As a pilot operated regulator design, the
M2000 handles up to 250 psig, [17.0 BAR], (1700 kPa) supply
pressure. The Fairchild Model 2000 provides a flow capacity of
40 SCFM (68 m3/HR), which results in a Cv factor of just less
than 1.0 in forward flow mode.
Model 20 -
View
M20 Specs
45 SCFM
[76.5 m3/Hr] Forward/Exhaust Flow Volume Boosters (M20)
The Model 20 Volume
Booster is a smaller pneumatic device capable of high flow and
exhaust capacity. This device uses a force balance system to
control the movement of the supply and exhaust valves. As a
pilot operated regulator design, the M20 handles up to 150 psig,
[10.0 BAR], (1000 kPa) supply pressure and has ten available
ratios to cover a wide range of applications. The Fairchild
Model 20 Booster provides a flow capacity of 45 SCFM (76.5
m3/HR), which equates to a Cv factor of approximately 1.0 in
both forward and exhaust modes.
Model 20BP
-
View M20BP Specs
Back
Pressure Pneumatic Booster (M20BP)
Fairchild's M20BP is
a smaller Back Pressure Pneumatic Booster designed for
automation or remote controlling of the back pressure or relief
operation typically found in tank systems and other pressurized
systems. In its pilot operated design, the M20BP will operate
from a signal pressure of up to 150 psig [10.0 BAR] (1000kPa)
and handles up 250 psig, [17.0 BAR], (1700 kPa) system pressure.
The Fairchild Model 20BP Back Pressure Booster provides a flow
capacity of 45 SCFM (76.5 m3/HR), which equates to a Cv factor
of approximately 1.0.
Model 4500A -
View
M4500A Specs
150 SCFM [255 m3/Hr]
Forward/Exhaust High Flow No Bleed
Volume Boosters (M4500A)
Fairchild's Model
4500 Pneumatic Volume Booster is popular due to its rugged
design and high flow capacity in an economical package. In its
pilot operated regulator design, the M4500 handles up 250 psig,
[17.0 BAR], (1700 kPa) supply pressure and has five available
signal to output ratios to meet most control element
requirements. The Fairchild Model 4500 Booster provides a flow
capacity of 150 SCFM (255 m3/HR), which equates to a Cv factor
of approximately 3.0 in both forward and exhaust modes.
Model
4500ABP -
View M4500ABP
Specs
Back
Pressure Pneumatic Booster (M4500ABP)
Fairchild’s M4500ABP
is a High Flow Back Pressure Booster designed for automation or
remote controlling of the back pressure or relief operation
typically found in tank systems and other pressurized systems.
In its pilot operated design, the M4500ABP will operate from a
signal pressure of up to 150 psig [10.0 BAR] (1000kPa) and
handles up 250 psig, [17.0 BAR], (1700 kPa) system pressure. The
Fairchild Model 4500ABP Back Pressure Booster provides a flow
capacity of 150 SCFM (255 m3/HR), which equates to a Cv factor
of approximately 3.0.
Model
4800A -
View M4800A Specs
500 SCFM
[850 m3/Hr] Forward/Exhaust
High Flow No Bleed Volume Booster with Bypass Valve (M4800A)
Fairchild’s M4800A is
a High Flow Pneumatic Volume Booster specifically designed for
Valve and valve actuation systems. With its Cv of 9 in both
forward and exhaust modes, this pilot operated booster provides
fast response and accurate control for valve actuation. In
addition, the M4800A has an integral bypass valve, for optimum
tuning and adjustment, even while in operation, to obtain
maximum performance on opening and closing times with minimal
overshoot or oscillation. In its pilot operated regulator
design, the M4800A handles up 250 psig, [17.0 BAR], (1700 kPa)
supply pressure and delivers an output pressure up to 150 psig
[10.0 BAR] (1000kPa). The Fairchild Model 4800A Booster provides
a flow capacity of 500 SCFM (850 m3/HR), which equates to a Cv
factor of approximately 9 in both forward and exhaust modes.
Model 4900A
-
View M4900A Specs
500 SCFM
[850 m3/Hr] Forward/Exhaust High Flow No Bleed Volume Booster
(M4900A)
Fairchild’s M4900A is
a High Flow Pneumatic Volume Booster designed for high precision
applications. With its Cv of 9 in both forward and exhaust
modes, this pilot operated booster provides fast response, very
low deadband and high precision control. In its pilot operated
regulator design, the M4900A handles up 250 psig, [17.0 BAR],
(1700 kPa) supply pressure and delivers an output pressure up to
150 psig [10.0 BAR] (1000kPa). The Fairchild Model 4900A Booster
provides a flow capacity of 500 SCFM (850 m3/HR), which equates
to a Cv factor of approximately 9 in both forward and exhaust
modes.
Model 200
-
View M200 Specs
1800 SCFM
[3058 m3/Hr] Forward Ultra High Flow Volume Booster (M200)
The Model 200
Pneumatic Volume Booster reproduces a pneumatic signal in a 1:1
ratio. It is ideally suited for systems that require input
isolation or increased forward flow capacity. This device uses a
force balance system to control the movement of the supply and
exhaust valves. As a pilot operated regulator design, the
Fairchild Model 200 handles up to 250 psig, [17.0 BAR], (1700
kPa) supply pressure and provides a flow Ultra high flow
capacity of 1800 SCFM (3058 m3/HR), which equates to a Cv factor
of approximately 18 in forward flow mode.
Model
200XLR -
View
M200XLR Specs
1800 SCFM
[3058 m3/Hr] Forward /Exhaust Ultra High Flow Volume Booster
(M200XLR)
The Model 200
Pneumatic Volume Booster reproduces a pneumatic signal in a 1:1
ratio. It is ideally suited for systems that require input
isolation or increased forward flow capacity. This device uses a
force balance system to control the movement of the supply and
exhaust valves. As a pilot operated regulator design, the
Fairchild Model 200 handles up to 250 psig, [17.0 BAR], (1700
kPa) supply pressure and provides a flow Ultra high flow
capacity of 1800 SCFM (3058 m3/HR), which equates to a Cv factor
of approximately 18 in forward flow mode.
|
